Feature
Compact body
While the IC-V85 provides a full 7 watts of output power, its 110mm* body height is compact enough to allow for easy carrying. * 411⁄32 in (projections are not included)
7W of high output power
Let the power of 7 watts extend your communications range. With its large capacity Lithium-Ion battery pack, BP-227, the IC-V85/E provides a practical 7 hours* of operating time. Reduced power (4W/0.5W) settings are also available for even longer operating time. * Typical operation with Tx: Rx: standby=1:1:8.
External DC power jack
An external DC power jack allows for operation when used with the external DC power supply (11.0V DC). Your IC-V85/E receives and transmits as it charges.
Water resistant construction
The water resistant construction, equivalent to IPX4 rating, provides reliable operation in wet conditions for practical outdoor usage.
107 memory channels and 10 memory banks
Up to 107 memory channels can be stored. Use the 5-character display capabilities to assign your own individual channel names, then store those channels in any of the 10 memory banks. The DMS (Dynamic Memory Scan) system allows you to scan selected memory banks by simply adding and deleting bank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allows you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the tone frequency used in the received signal.
DTMF memory and optional DTMF decoder
16 DTMF memory channels with up to 24 DTMF codes enable you to perform remote control operation. The optional DTMF decoder unit, UT-108, provides code squelch operation and pager function.
Specification
| General | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Frequency coverage (unit : MHz): |
|
||||||||||||
| Mode | FM | ||||||||||||
| No. of memory Ch. | 107 (incl. 6 scan edges and 1 call) | ||||||||||||
| Operating Temp. range | –10°C to +60°C ; +14°F to +140°F | ||||||||||||
| Frequency stability | ±2.5ppm (–10°C to +60°C) | ||||||||||||
| Power supply requirement | BP-226/BP-227 or 11.0V ± 15% (External DC in) | ||||||||||||
| Current drain (at 7.2V DC) |
|
||||||||||||
| Antenna impedance | 50Ω (BNC) | ||||||||||||
| Dimensions (W×H×D) (Projections not included) | 56 × 110 × 34.4 mm; 27⁄32× 411⁄32× 111⁄32 in | ||||||||||||
| Weight (approx.) | 310g; 12.5oz (with BP-227 and Ant.) | ||||||||||||
| Transmitter | |
|---|---|
| Output power (at 7.2V) | 7.0/4.0/0.5W (High/mid/low) |
| Spurious emissions | Less than –60dBc |
| Max. freq. deviation | ±5.0kHz |
| External microphone connector | 3-conductor 2.5(d)mm (1⁄10″) /2.2kΩ |
| Receiver | |
|---|---|
| Intermediate freq. | 46.35MHz/450kHz (1st/2nd) |
| Sensitivity | Less than 0.2μV (at 12dB SINAD) |
| Squelch sensitivity | Less than 0.16μV (threshold) |
| Selectivity | More than 55dB |
| Spurious and image rejection | More than 60dB |
| Intermodulation | More than 55dB |
| Audio output power | More than 300mW with an 8Ω load |
| Ext. speaker connector | 3-conductor 3.5(d) mm (1⁄8″) /8Ω |
Supplied Accessories
- TRANSCEIVER
- BATTERY CASE
- ANTENNA
- BELT CLIP
