Feature

Icom changed the way hams think about mobile HC communication in 1995 with the introduction of the IC-706. Since then, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. At the 2012 Tokyo Hamfair, Icom once again changed mobile HF communications by introducing the IC-7100. The ease of operation with fingertip control utilizing the intuitive touch screen interface with the power of 32-bit IF DSP.

Output Power		100W HF/50MHz 50W 144MHz 35W 430/440MHz
RX Frequencies:		0.030-199.99, 400-470
Receiver Type:		Triple conversion superhetrodyne

Touch Screen Interface

The angled radio control head features a large, multi-function, “touch screen”‘ dot-matrix LCD display that is positioned for easy view and operation. It also allows you to operate it while wearing gloves. The control head’s rear panel includes an internal speaker plus jacks for external speaker/headphones, CW key and microphone. The innovative touch screen interface provides quick operation for setting and editing various functions and memories. Just tap the frequency, mode, filter, function etc, and quickly navigate through the changes you want. Additionally, the touch screen also allows you to input alphanumeric characters for call signs or memory channels. IC-7100 Touch-Screen Interface

D-STAR Ready

The IC-7100 provides D-STAR DV mode digital voice and low speed data communications. Add a third party GPS* and search the internal database based on your location. Additionally, the IC-7100 incorporates DR mode, which allows the user to control their D-STAR routing based on where they are talking “FROM” and where they want to talk “TO”, including Reflector controls. *External GPS receiver or manual data input required.

Digital Features Controlled by the IF DSP

A high-performance 32-bit floating point IF DSP delivers rich digital signal processing features, including digital IF filter, digital twin PBT, noise reduction, CW auto tune, etc. Those digital features work on all bands from HF to V/UHF bands.

Additional Features:

Built-in SD card slot for voice storage and data cloning
Built-in RTTY demodulator and decoder
CW full break-in, CW receive reverse, CW auto tuning
Band scope and SWR graphic display
RF speech compressor controlled by the DSP
Voice memory function
Multi-function Meter
495 regular, 4 call, 6 scan edge and 900 DR mode repeater channels
4 channels TX voice memories
±0.5ppm frequency stability
Auto reply function in D-STAR DV mode
Digital callsign squelch and digital code squelch in D-STAR DV mode
12.5kHz IF output for DRM (Digital Radio Mondiale) receive
DSP controlled AGC function loop

General Specification

Frequency coverage*¹	Receiver	0.030–199.999 MHz² 400.000–470.000 MHz²
Frequency coverage*¹	Transmit	1.810–1.999 MHz 3.500–3.800 MHz 7.000–7.200 MHz 10.100–10.150 MHz 14.000–14.350 MHz 18.068–18.168 MHz 21.000–21.450 MHz 24.890–24.990 MHz 28.000–29.700 MHz 50.000–52.000 MHz 70.000–70.500 MHz 144.000–146.000 MHz 430.000–440.000 MHz
Mode		USB, LSB, CW, RTTY, AM, DV, FM, WFM(Rx only)
No of memory channels		495 regular, 4 call, 6 scan edges, 900 D-STAR repeater channels
Antenna connector		SO-239×2 (one each for HF/50/70 MHz and 144/430 MHz, 50 Ω)
Operating Temp. range		−10°C to +60°C
Frequency stability		±0.5 ppm (0°C to +50°C @ 430 MHz)
Power supply requirement		13.8 V DC ±15%
Current drain (at 13.8 V DC)	Tx:	22 A (HF/50/70 MHz) 16 A (144/430 MHz)
Current drain (at 13.8 V DC)	RX:	1.2 A/0.9 A (Max. audio/standby)
Dimensions (W×H×D, projections not included)	Main unit	167×58×225 mm
Dimensions (W×H×D, projections not included)	Controller	165×64×78.5 mm
Weight (approx.)	Main unit	2.3 kg
Weight (approx.)	Controller	0.5 kg

*¹Showing EUR(#03) version. Varies depending on the version. *²Some frequency bands are not guaranteed.

Transmitter

Output power (at 13.8 V DC)	SSB/CW/RTTY/FM/DV	HF/50 MHz: 2–100W 70 MHz: 2–50 W 144 MHz: 2–50 W 430 MHz: 2–35 W
Output power (at 13.8 V DC)	AM	HF/50 MHz: 1–30 W 70 MHz: 1–15 W
Modulation system	SSB	Digital P.S.N. modulation
	AM	Digital low power modulation
	FM	Digital phase modulation
	DV	GMSK digital phase modulation
Spurious emissions		Less than −50 dB (HF bands) Less than −63 dB (50MHz) Less than −60 dB (70/144/430 MHz)
Carrier suppression		More than 50 dB
Unwanted sideband		More than 50 dB

Receiver

Sensitivity (HF: Preamp-1 ON, 50/70 MHz: Preamp-2 ON, 144/430 MHz: Preamp ON)
Intermediate frequencies	SSB/CW/AM/FM/RTTY/DV	124.487 MHz, 455 kHz, 36 kHz
Intermediate frequencies	WFM	134.732 MHz, 10.700 MHz
	SSB/CW (BW=2.4 kHz at 10 dB S/N)	1.8–29.995 MHz: 0.15 μV 50 MHz: 0.12 μV 70 MHz: 0.15 μV 144/430 MHz: 0.11 μV
	AM (BW=6 kHz at 10 dB S/N)	0.5–1.8 MHz: 13 μV 1.8–29.995 MHz: 2 μV 50 MHz: 1 μV 70 MHz: 1 μV 144/430 MHz: 1 μV
	FM (BW=15 kHz at 12 dB SINAD)	28–29.7 MHz: 0.5 μV 50–54 MHz: 0.25 μV 70 MHz: 0.25 μV 144/430/440 MHz: 0.18 μV
	DV (at 1% BER)	28–29.7 MHz: 1 μV 50 MHz: 0.63 μV 70 MHz: 0.63 μV 144/430 MHz: 0.35 μV
	WFM (at 12 dB SINAD)	76–108 MHz: 10 μV
Sensitivity for RED (Less than) Preamp ON SSB, AM, FM: at 12 dB SINAD	SSB (2.4 kHz)	1.8–2.999 MHz 10 dBμV emf 3.0–29.995 MHz 0 dBμV emf 50/70 MHz band –6 dBμV emf 144/430 MHz band –6 dBμV emf
	AM (4 kHz, 60% modulation)	1.8–2.999 MHz 16 dBμV emf 3.0–29.995 MHz 6 dBμV emf 50/70 MHz band 0 dBμV emf 144/430 MHz band 0 dBμV emf
	FM (7 kHz, 60% modulation)	28–29.700 MHz 0 dBμV emf 50/70 MHz band –6 dBμV emf 144/430 MHz band –6 dBμV emf
Selectivity	SSB (BW=2.4 kHz, sharp)	More than 2.4 kHz / −6 dB Less than 3.4 kHz / −40 dB
	CW (BW=500 Hz, sharp)	More than 500 Hz / −6 dB Less than 700 Hz / −40 dB
	RTTY (BW=500 Hz)	More than 500 Hz / −6 dB Less than 800 Hz / −40 dB
	AM (BW=6 kHz)	More than 6.0 kHz / −6 dB Less than 10 kHz / −40 dB
	FM (BW=15 kHz)	More than 12 kHz / −6 dB Less than 22 kHz / −40 dB
	DV (12.5 kHz spacing)	More than −50 dB
Spurious and image rejection ratio		More than 70 dB (HF/50/70 MHz) More than 65 dB (144/430 MHz) (except 1/2 IF through on 50/70 MHz, IF through on 144 MHz)
Audio output power		More than 2.0 W (10% distortion, 8 Ω load, 13.8 V DC)

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

Hand microphone, HM-198
DC power cable
CW keyer plug
Spare fuses
Separation cable, OPC-2253
13-pin plug ACC cable
USB cable
Ferrite bead*

* May differ depending on the version.

Download Manual/Brochure

IC-7100(EUR)

ICOM IC-7100 HF/VHF/UHF ALL MODE TRANSCEIVER