Features |
8 OPTO-isolated NMEA 0183 inputs |
6 ISO-Drive NMEA 0183 outputs |
Bi-directional isolated serial port (can be used for additional NMEA 0183 input/ output) |
0183 streaming via Ethernet |
Alarm output (N/O and N/C contacts) |
Designed for 12- and 24-Volt supply |
Isolation to battery supply |
Configurable input and output baud rates for rate conversion |
Data combining from any input to any output |
2 independent Autoswitch virtual inputs with priority |
Advanced sentence-based filtering / routing |
Diagnostic LEDs on all inputs and outputs |
Alarm, mode and Bi-colour Status LED’s |
2-part pluggable connector system supports both screw and screwless terminals |
DIN rail or Panel mountable |
Advanced statistics are available via a Web Browser |
Benefits |
Quick and easy to install |
Configuration using standard web browser, no PC operating system compatibility issues |
Advanced features solve NMEA 0183 data routing problems |
Fully isolated with ISO-Drive technology for peace of mind |
Easy firmware updates makes the device future-proof |
SPECIFICATION
/tab]
BOX
Power Supply | |
Input Supply Voltage | 9 to 35 V DC |
Input Supply Current | 220mA max @ 12V DC (all outputs @ full drive into 100 ohm loads) |
Input Protection | Continuous reverse polarity, transient overvoltage and ESD protection |
Power Indicator | LED, Blue – indicates unit is functioning correctly |
Input Supply Connector | Pluggable 2-way screw terminal, 5.08mm pitch (12 to 30 AWG) |
NMEA 0183 Port – Listener & Talker | |
Number of Listener / Input Ports | 8 isolated NMEA 0183 Listeners |
Number of Talker / Output Ports | 6 isolated NMEA 0183 Talkers |
Compatibility | Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible |
Speed / baud rate | 4800 to 38400 bps |
Talker Output Voltage Drive | >= 2.2V (differential) into 100 ohm |
Talker Output Current Drive | 20 mA maximum per output |
Talker Output Protection | Short circuit and ESD |
Talker Data Indicator | LED, Orange (Flashes at data rate) |
Listener Input Voltage Tolerance | -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second) |
Listener Input Protection | Current limited, overdrive protection to 40 VDC and ESD protection |
Listener Data Indicator | LED, Green (Flashes to indicate valid input) |
Connectors | Pluggable 2/3-way screw terminals, 5.08mm pitch (12 to 30 AWG) |
Serial Port | |
Compatibility | RS422 & RS232 compatible. RS485 Listener compatible |
Speed / baud rate | 4800 to 115200 bps |
Output Voltage Drive | >= 2.1V (differential) into 100 ohm |
Output Current Drive | 20 mA max. |
Output Protection | Short circuit and ESD |
Input Voltage Tolerance | -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second) |
Input Protection | Current limited, overdrive protection to 40 VDC and ESD protection |
Data Indicators | LED’s: Green = Receive, Orange = Transmit |
Connectors | Pluggable 3-way screw terminals, 5.08mm pitch (12 to 30 AWG) |
Ethernet Port | |
Host Interface | 10/100BaseT, automatic polarity detection |
Supported Protocols | TCP/IP for configuration and firmware updating |
TCP/IP and UDP for NMEA 0183 comms | |
Indicators | Green = Link/Activity, Yellow = 100 Mbps |
Connector | RJ45 |
Isolation | |
NMEA 0183 Listener | OPTO-Isolated, Hi-Pot tested to 1000V |
NMEA 0183 Talker | Uses IsoDrive™, Hi-Pot tested to 1000V |
Serial Port | Uses IsoDrive™, Hi-Pot tested to 1000V |
Alarm Relay | Hi-Pot tested to 1000V |
Ethernet Port | 2kV for 60s |
Mode Inputs | |
Input Voltage Range | 0 to 35V DC |
Protection | Transient overvoltage and ESD protection |
Connectors | Pluggable 2-way screw terminals, 5.08mm pitch (12 to 30 AWG) |
Alarm Output | |
Contacts | Common, Normally Open and Normally Closed |
Alarm Indicator | LED, Red indicates a valid alarm condition |
Contact Ratings | 35VAC / 50VDC |
Connectors | Pluggable 3-way screw terminals, 5.08mm pitch (12 to 30 AWG) |
Mechanical | |
Housing Material | 316 Stainless Steel |
Dimensions | 210mm (W) x 128mm (H) x 27mm (D) |
Weight | 540g |
Mounting | Bulkhead mount or DIN rail mount (DIN kit 1) |
Approvals and Certifications | |
EMC | IEC 60945:2002-08, DNVGL-CG-0339:2019 & IACS UR E10 Rev7 |
Compass Safe Distance | 175mm |
Type Approval Certificate | TBD |
Operating Temperature | -25 to +70°C |
Storage Temperature | -40 to +85°C |
Relative Humidity (RH) | 95% @ 55°C |
Environmental Protection | IP40 |
Download Manual/Brochure