Feature
- 7 W Output Power and 1500 mW Audio
- 1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure
- The combination of the optional HM-222HLWP and the IC-V86/U86* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.* For the transceiver with a “U” mark on the serial number label.
- Dust-Protection, Water Resistance and a Tough Body
- 19 hours of Long Lasting Battery Life
- No PC Programming Necessary, Settings Changeable from the Radio
- Durable BNC Type Antenna Connector
- Made in Japan Quality and Reliability
Other Features
- Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
- Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
- Integrated VOX function
- 200 memory channels, 1 Call channel and 6 scan edges
- Built-in CTCSS and DTCS encoder/decoder
- Priority, program, memory, skip and tone scanning
General Specification
IC-V86 | IC-U86 | ||
---|---|---|---|
Frequency range (TX/RX guaranteed range) | TX: 144–148 MHz RX: 136–174 MHz | TX: 430–450 MHz RX: 400–472 MHz | |
Type of emissions | F2D, F3E (FM, FM-N) | ||
Number of channels | 207 channels (200 memory channels, 1 call channel and 6 scan edges) | ||
Antenna impedance | 50Ω | ||
Power supply requirement | 7.5V DC | ||
Operating temperature range | –20 ˚C to +60 ˚C, –4 °F to +140 °F | ||
Frequency stability | ±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F) | ||
Current drain (For the transceiver with a “U” mark on the serial number label) | TX (EX Hi/Hi/Mid/Low) | 1.6/1.4/1.0/0.5 A typical | EXP1: 1.6/1.5/1.0/0.5 A typ. EXP2: 1.6/1.4/0.9/0.5 A typ. |
RX (Max. audio) | 450 mA typ. (INT SP), 190 mA typ. (EXT SP, Single end) 450 mA typ. (EXT SP, BTL) | 450 mA typ. (INT SP), 190 mA typ. (EXT SP, Single end) 450 mA typ. (EXT SP, BTL) | |
Dimensions (W×H×D) (Projections not included) | 58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298) | ||
Weight (Approximate) | 300 g, 10.6 oz (with BP-298, FA-B57V) | 290 g, 10.2 oz (with BP-298, FA-B57U) |
Transmitter
IC-V86 | IC-U86 | |
---|---|---|
Output power (EX Hi/Hi/Mid/Low) | 7.0/5.5/2.5/0.5 W | 5.5/4/2/0.5 W |
Maximum frequency deviation | ±5.0 kHz/±2.5 kHz (Wide/Narrow) | |
Spurious emissions | Less than –60 dB | |
External microphone connector | 3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ |
Receiver
IC-V86 | IC-U86 | ||
---|---|---|---|
Sensitivity | –124 dBm typical | EXP1: –121 dBm typical EXP2: –123 dBm typical | |
Squelch sensitivity | –126 dBm typical | EXP1: –123 dBm typical EXP2: –125 dBm typical | |
Selectivity (Wide/Narrow) | 75 dB typical/ 70 dB typical | 70 dB typical/ 68 dB typical | |
Intermodulation | 65 dB typical | ||
Audio output power (For the transceiver with a “U” mark on the serial number label) | Internal SP | 1500 mW typical (with 8 Ω load) | |
External SP | 450 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected) | ||
External speaker connector | 3-conductor 3.5(d)mm (1/8″)/8Ω |
Applicable IP Rating
Ingress Protection Standard | |
---|---|
Dust and Water | IP54 (Dust-protection, water resistance) |
Supplied Accessories
- BP-298/BP-264, battery pack*
- BC-240, Desktop charger
- BC-242, AC adapter
- MB-124, belt clip
- Antenna*