Feature
- 750 mW loud audio
- The IC-V80/E uses the BTL (bridge-tied load) amplifier that doubles the audio output. The 36 mm large speaker delivers 750 mW of loud and intelligible audio*. Great for noisy environments. * Typical value using with internal speaker.
- Powerful 5.5 W of output power
- The IC-V80/E offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours with the Ni-MH (BP-264). All that power comes is an easy to hold and use size – not too big, not too small. * Typical operation. 5:5:90 duty cycle with power save on.
- IP54 and MIL-STD-810 rugged construction
- The dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-V80/E tested to and passed 11 categories of MIL-STD-810 environmental tests.
- A total of 207 memory channels
- The IC-V80/E has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
- Built-in CTCSS/DTCS
- The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
- Internal VOX function
- The IC-V80/E has internal VOX (Voice Operated Transmit) function for convenient handsfree operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.
Other features
- WX channel and weather alert function (USA version only)
- Program, memory, skip, priority and tone scans
- Power save function
- BNC type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access (IC-V80E only)
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-V80
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
General
| Frequency coverage | IC-V80 (U.S.A.) Tx: 144 – 148 MHz Rx: 136 – 174 MHz IC-V80E (Europe) Tx･Rx: 144 – 146 MHz | ||
|---|---|---|---|
| Current drain (approx.) | TX High | 1.4 A (typ.) | |
| RX Max. audio/Stand-by | 310 mA with Internal speaker (typ.) 180 mA with External 8 Ω speaker (typ.) 65 mA (typ.) during stand-by 20 mA (typ. 9 during Power save | ||
| Dimensions (W×H×D) (Projections not included) | 52.2×111.8×22.3 mm (with BP-264) | ||
| Weight | 140 g; 4.9 oz (without Battery pack) | ||
Transmitter
| Output power (at 7.5V) | 5.5/2.5/0.5 W (Hig/mid/low) | |
|---|---|---|
| Max. frequency deviation | ±5.0 kHz/±2.5 kHz (Wide/Narrow) | |
| Spurious emissions | Less than -60B | |
| Ext. microphone connector | 3-conductor 2.5(d) mm (1/10″)/2.2 kΩ | |
Receiver
| Sensitivity | 0.14 μV typ. (at 12 dB SINAD) | ||
|---|---|---|---|
| Squelch sensitivity | 0.1 μV typ. (at threshold) | ||
| Selectivity | 70 dB/50 dB typ. (Wide/Narrow) | ||
| Intermodulation | 70 dB/65 dB typ. (Wide/Narrow) | ||
| Spurious and image rejection | 75 dB (typ.) | ||
| Audio output power | Internal SP | 750 mA typ. (16 Ω load) | |
| External SP | 450 mW typ. (8 Ω load) | ||
| External speaker connector | 3-conductor 3.5(d)mm (1/8″)/8 Ω | ||
Applicable IP Rating
| Ingress Protection Standards | |
|---|---|
| Dust & Water | IP67 (Dust-tight and waterproof protection) |
Supplied Accessories
- Battery pack*
- Antenna*
- Belt clip*
- Battery charger*
- AC adapter*
